Water taps, or faucets are fixtures that can be installed by any competent dyer to transform the aesthetic of their home. There is no need to worry if you’re replacing a leaky water tap or simply switching to a more up-to-date design.
The process appear to be complicated, but it is essential to follow through with almost every step, from turning off the water supply to placing the new tap where it’s needed. If you have trouble with the replacement of the water tap, hiring plumbing services to do the job is always an option.
Here is how a water tap can be replaced;
1. Turn off the Water Supply
Safety is the prime concern when beginning plumbing work of any kind. The first step is to turn the water tap off. The shut-off valves can be found under the sink; rotating them clockwise will close them. However, the water supply must be shut off if there are no additional shut-off valves. While doing this, open the old tap to clear the pipes. If you’re unfamiliar with safely turning water or encountering issues, don’t hesitate to visit professionals at https://www.pshomemaintenance.com/.
2. Remove the Old Tap
After the water has been cut off, remove the antique tap. Use a wrench to unscrew the nuts retaining the tap at the sink’s base. If the tap no longer comes out effortlessly, a touch of lubricating oil might also assist in removing it. Once followed, the old tap can be removed; it should be set aside.
3. Area Cleaning
Remove the old sealant and old caulk used previously on the tap will be left behind and should be scraped off with a utility knife or scraper.
- Debris and Dirt Removed: Wipe the surface of the area with a cloth or sponge so that any dust, dirt, or debris that can affect the assignment does not remain on it.
- Area Disinfection: Methylated spirit or mild cleaning liquid, ginger or any other appropriate disinfectant can be used to clean and disinfect the area.
4. Install the New Tap
Now that the clean area has been secured, inserts can be mounted over the sink’s holes. Use the wrenches from below; screw the nuts that tightly secure the mounted faucet. Once fitted, care should be maintained so that unnecessary excessive force should not be applied since, if so, the sink or a faucet can get damaged.
5. Reconnecting the Water Supply Hoses
Once the new tapping is in place, loosen the valve and reconnect it with the supply lines using a wrench. Ensure that the supply hoses are connected and correctly installed so that no leakages occur when the water flow is turned back on.
6. Turn on the Water and Test for Leaks
All installations have been completed, so it’s time to turn the supply back on. Gradually turn the shut-off valves and check for leaks in the tap or any other source. Try turning the tap on and off a few times to ensure standard functionality.
7. Finish Up
All the peripherals are functioning correctly, so clean the perimeter of the faucet and any tools left behind with cleaning supplies, a mop, or a cloth. If necessary, attach a spray hose or a new handle to your faucet.
When to Call Out a Plumber
The process of changing out a water tap isn’t complicated. However, occasionally, problems can crop up. For example, if you encounter rust or feel unsure about connecting the plumbing, it is better to contact plumbers. Qualified plumbing contractors will take care of the installation correctly, avoiding wasting time and irritation.
